It
is true that there is no way to stop all grease from going down a
kitchen drain. In this case, installing grease traps are considered to
be the most effective way out. Apart from being a part of home, the
grease traps are used to be installed mainly at restaurants,
institutional kitchens and hospitals.
If you are thinking to install grease trap for your kitchen, then check out the following to get a clear idea:
#1- The Facts about Grease Traps:
The
grease trap is also known as grease interceptors that is attached to
the plumbing under the kitchen sink. For any restaurant business, the
grease trap plays an important role, as it ensures a top functioning
plumbing section. A properly installed and maintained grease trap will
make sure that all your cooking grease and food waste undergoes proper
disposal without causing any blockage. Normally grease traps are used in
kitchens to remove solid, fats, oil and grease (these are collectively
known as FOGs) from the waste water before these are discharged into the
municipal wastewater systems.
#2- How the Grease Traps Work?
The
main work of grease trap is to reduce the amount of damage and clogging
to your plumbing and septic tank. Normally it is believed that food
preparation sinks, floor drains and commercial kitchen sinks that
collect grease should have grease traps to collect the unwanted waste,
solid particles and FOG and prevent an unwanted buildup in the municipal
sewer line.
#3- What are the Common Grease Trap Problems?
You should be aware of some common grease trap problems that can impact its efficiency, such as:
-
Clog in Crossover: This situation occurs when FOGs or debris buildup in the crossover line between the two compartments of the plumbing section.
-
Clog in Incoming Line: The clog in the incoming line will affect the lowest plumbing fixture of the restaurant.
-
Clog in Outgoing Line: A clog in the outgoing line will result in an overflow from both compartments of the plumbing section.
To
avoid these type of grease trap problems, you need to ensure proper
maintenance and routine cleanup; this will also assure crucial in
keeping the drains flowing smoothly and prevent costly backups. It is
important to understand that the process of cleaning the grease trap
depends on the frequency and quantity of the waste material that goes
down the drain.
#4- The Necessity of Grease Trap:
For
the municipal sewer, FOG (fat, oil and grease) is the big problem,
which comes out from kitchens and can cause massive blockages that
proves to be expensive and time consuming to fix. In this case
installing a grease trap will offer you the best results by saving your
time and money. Both home and commercial restaurants will get benefited
by installing a grease trap.
You will get an opportunity to get a professional grease trap installation from Allied/All-City Inc
for enjoying a top functioning plumbing system. We are one of the most
reliable and experienced plumbing and environmental firm in New York
that offer an exceptional service of installing and maintaining your
grease trap by keeping in mind the laws and specific regulations (as per
the specific area and building code) for executing the plumbing
process.
To
get more information about planning, estimates, installations and more,
please contact us today at 5167852700. We are proud to extend our
reliable service to New York’s different areas like Nassau, Suffolk and
Long Island. For more details visit us at facebook.com, twitter.com, delicious.com, diigo.com and scoop.it .
0 comments:
Post a Comment